Depending on the device, different device settings are available in the configuration.
Die Device settings can be made via the Rademacher app and via the PC interface. The images shown here show the Rademacher app.
Voice control: The SmartHome Box currently supports voice control via Alexa, Google Assistant and Siri short commands. In order for the devices to be found by the providers, the device must be enabled for the service by clicking on the service.
Mode change: The function generally has no influence on the operating behavior of the device. Only if the device is controlled directly with UP or DOWN commands does the behavior change. One example is the standard 9491 hand-held transmitter. If you register this transmitter directly with the switching actuator, the light is usually switched on with the UP button. However, if you have also registered shutters on the same button, this would result in the light being switched on when the shutters are opened. However, if you need exactly the opposite function, you can activate the mode change so that the switch actuator switches on with the DOWN button.
Staircase function and switch-off pre-warning: With the staircase function , the device can be switched off after a desired time. The time can be set in small steps from 0.1 seconds to approx. 54 minutes (3276 seconds).
Most actuators offer a switch-off warning, which causes the device to flash a few times before switching off. The switch-off pre-warning can be activated from a switch-on duration of 60 seconds.