The RolloPort is usually attached directly to the ceiling by a mounting bracket (B) and by the center suspension (D). In addition, the lintel bracket (A) is used for fastening to the lintel.
If direct mounting to the ceiling is not possible because the ceiling height is so high that there is more than 25cm of air between the highest point of the door and the rail, the perforated tape angles must be used for suspension.
To do this, bend the angles to the desired length and then connect them to the mounting bracket and the center suspension.
The drive can be mounted in this way.
The front attachment should preferably be made to the lintel, as this allows the forces that occur to be absorbed optimally.