SmartHome Box 9496-3
The following sequence must be observed when connecting the SmartHome Box.
1. Plug the enclosed LAN cable into the LAN port of the SmartHome Box and connect it to a free LAN port on your router.
2. Connect the enclosed power supply unit to the power input [ DC 5 V/3 A ] of the SmartHome Box and then plug the power supply unit into a free 230 V / 50 Hz mains socket.
As soon as the LED lights up green continuously, the device is ready for operation and can be configured via the Rademacher app or the PC.
Connections and buttons:
** A reset deletes all data and loads the factory settings.
To perform a reset, pull the power supply unit out of the SmartHome Box. Then press and hold the reset button with a thin object (paper clip) and then plug the power supply unit back in with the button held down. Keep the button pressed until the LED lights up red.