Briefly press the "Connect" button on the back of the device once with a thin object.
The LEDs of all device or group keys light up.
Press the key with which you want to operate the device later.
Note the status LED, if the LED lights up green for a few seconds, the registration was successful, if the LED flashes orange, the key is already occupied.
Note: If a device has several channels (e.g. 2-channel actuator part no. 9470-2), you must select a group button for each channel. For this purpose, the LEDs go out briefly after the first channel has been assigned and immediately go on again to assign the second channel.
Tip: You have the possibility to register devices several times to realize e.g. a group control. If, for example, three devices are present, they can be registered individually on keys 1-3 and all three together on key 4.