With the hand transmitter Standard the end points of Rademacher radio tubular motors can be set and also of electronic Rademacher tubular motors from year of manufacture 2000, which are controlled via tubular motor actuators UP 9471.
Important: The function is only possible if ONLY the one motor to be set is taught-in on the group button of the hand-held transmitter. If the transmitter is also registered with the HomePilot, the function cannot be executed either. In this case, the transmitter must first be de-registered from the HomePilot.
Procedure: Select the corresponding group button (LED lights up green), then quickly tap the Disconnect button twice on the back. The status LED on the top left of the front panel must flash green. If the LED flashes red, you probably did not press fast enough. Please repeat the process accordingly.
When the LED flashes green, press and hold the appropriate direction key until the desired end point is reached. At the same time, the LED flashes red. The second end point can then be set directly.
When both end points are set appropriately, press the stop key to finish.