Activate login via keys on the device:
To activate the login mode, press the Up and Connect keys simultaneously for 4 seconds.
The indicator light flashes green and the login mode remains active for 60 seconds.
Switch the respective DuoFern transmitter to registration mode. Read the operating instructions for the corresponding DuoFern transmitter.
After successful login, the control lamp of the RolloTron Basic DuoFern lights up green for 5 seconds.
The indicator lamp lights up red if the login failed. For example, if
- 20 DuoFern transmitters are already registered
- an attempt is made to register an unsuitable device (e.g., another RolloTron Basic DuoFern 1200).
Basic note:
Without an end point setting, the RolloTron Basic DuoFern 1200 will only run as long as one of the two control buttons is pressed. Without an end point setting, the automatic functions remain disabled.