Register the hand-held transmitter on the RolloPort S2:
By default, both handheld transmitters are already registered on the garage door drive on the large button. If you want to register another hand-held transmitter or have deregistered a hand-held transmitter already included in the scope of delivery and want to register it again, proceed as follows.
1. Press the "S key" for approx. 2 seconds and then release.
2. Green dot appears in the display for acknowledgement. The log-in mode is active for approx. 10 seconds. As soon as the green dot goes out, the log-in mode is deactivated. To reactivate, press the "S key" again for approx. 2 seconds.
3. Press the key of the hand-held transmitter desired for operation twice. Upon successful login, the drive will beep briefly to acknowledge.
Notice:
After successful registration, you can operate your garage door drive with the handheld transmitter. You can then register additional handheld transmitters. You can register a maximum of 16 additional handheld transmitters (wall transmitters, coding switches, etc.).