Register the hand-held transmitter on the RolloPort S2:
By default, both handheld transmitters are already registered on the garage door drive on the large button. If you want to register another hand-held transmitter or have deregistered a hand-held transmitter already included in the scope of delivery and want to register it again, proceed as follows.
1. Press the "S key" for approx. 2 seconds and then release.
2. Green dot appears in the display for acknowledgement. The log-in mode is active for approx. 10 seconds. As soon as the green dot goes out, the log-in mode is deactivated. To reactivate, press the "S key" again for approx. 2 seconds.
3. Press the key of the hand-held transmitter desired for operation twice. Upon successful login, the drive will beep briefly to acknowledge.
After successful registration, you can operate your garage door drive with the handheld transmitter. You can then register additional handheld transmitters. You can register a maximum of 16 additional handheld transmitters (wall transmitters, coding switches, etc.).