You can completely switch the automatic system off and on again for all RolloTron belt winders. We describe the simplest way here. Depending on the model, automatics can also be switched over via radio control centers or hand-held transmitters.
Note:
RolloTron belt winders can ALWAYS be operated manually, regardless of whether the automatic system is activated or deactivated. Conversely, no automatic control is performed if the automatic control is deactivated. (Manual symbol or LEDs off)
RolloTron Comfort 1700/1740/1705 and RolloTron Comfort DuoFern 1800/1840/1805
Press the OK button for approx. 1 second. A manual symbol appears in the display. No automatic commands are executed in this state. To switch the automatic mode back on, press the OK key again for approx. 1 second. All activated automatic symbols appear in the display.
RolloTron Standard 1300/1340/1305
Press and hold the Auto/Manu button for approx. 1 second. All previously activated automatic functions are switched on or off together. Observe the LEDs.
RolloTron Standard DuoFern 1400/1440/1405
Press and hold the Stop/Set button for approx. 1 second. All previously activated automatic functions are switched on or off together. Observe the LEDs.
RolloTron Basic 1100, RolloTron Basic DuoFern 1200
The LED is always off on the device, regardless of whether automatic control is currently switched on or off.
You can check the current status by briefly pressing the Auto button. Observe the LED.
If the LED flashes only briefly, the automatic mode is deactivated.
If the LED lights up for approx. 10 seconds, the automatic mode is activated.
To toggle the state, press and hold the Auto button for approx. 1 second.
RolloTron swivel winder Comfort 1500/1540
On this device, the automatic mode can be switched off and on in the menu.
Open the menu with the M button
Select A and confirm with OK
OFF = Automatic off
ON = Automatic on
Confirm with OK and exit the menu with the M button.
RolloTron swivel winder Standard 1510/1550 and RolloTron swivel winder DuoFern 2510/2550
The LED is always off on the device, regardless of whether the automatic control is currently switched on or off.
You can check the current status by briefly tapping the clock button / auto button. Observe the LED.
If the LED flashes only briefly, the automatic mode is deactivated.
If the LED lights up for approx. 10 seconds, the automatic is activated.
To switch the state, press and hold the Auto key for approx. 1 second.
