First activate the setting mode. To do this, press and hold the red key on the drive until the internal lamp starts to flash. 2.
Press and hold the yellow key. The gate closes. Release the yellow key immediately when the gate is completely closed. 3.
Press and hold the blue button. The gate opens. Release the blue key immediately when the gate is fully open. 4.
Exit the setting mode by briefly pressing the red key. 5.
Now perform the three reference travels. The drive takes force measurements and automatically sets the force limit. 6.
Press the red key briefly to start the drive. The door must now be opened and closed completely three times. During the reference travels, the lighting in the drive flashes.
Note: The hand-held transmitters do not function until all reference movements have been saved as valid.