To reset the RolloTube C-line or M-line to the factory setting, both directions are switched on simultaneously for approx. 5 seconds.
The easiest way to do this is with our universal setting cable.
Connect the motor of the same color to the universal adjustment cable.
Switch on the running direction I or II with the switch.
At the same time press - within 1 second - button 2 (III) at the top left and hold it.
After approx. 5 seconds, the tube motor starts up briefly.
The reset has been carried out successfully.
Release the 2 (III) key.
Important: After the reset, the end points must be taught in again.