Basic login
As a rule, you only need to activate the DECT logon mode on the RolloTron DECT by pressing and holding the DECT button for approx. 2 seconds (LED flashes green) and then activate the logon mode on the Fritz!Box. Either by pressing and holding the DECT button on the Fritz!Box for approx. 6 seconds or alternatively start the login mode in the Fritz!Box interface.
If the login is not successful, please check the following points:
Requirements / restrictions on the part of AVM (Link to the source)
- No DECT repeater (under "Telephony > DECT > Monitor") must be logged on to the FRITZ!Box.
- A maximum of ten smart home devices from another manufacturer can be registered with the FRITZ!Box.
"Deactivate "Reduce DECT radio power
- Click on "Telephony" in the user interface of the FRITZ!Box .
- In the "Telephony" menu, click on "DECT".
- In the "Radio power" section, deactivate the "Reduce DECT radio power" option.
- Click "Apply" to save the settings.
Enable support for CAT-iq 2.0
In the factory settings, CAT-iq 2.0 support is active in the FRITZ!Box. If you have disabled this setting, enable it again:
- Click "Telephony" in the FRITZ!Box user interface.
- Click on "DECT" in the "Telephony" menu.
- Click on "Base station".
- In the "Troubleshooting" section, activate the "Support for CAT-iq 2.0 compatible devices active" option.
- Click on "Apply" to save the settings.