The RolloPort SX5 DuoFern contains two separate receiver parts, the first part is for the normal hand transmitters that are included in the accessory pack, the second part is responsible for the entire DuoFern range including HomePilot.
1. Activate the login mode by pressing the S button on the drive for about 2 seconds.
2. A 0 appears in the display, this stands for the login mode for the normal transmitters. This login mode only remains active for 10 seconds.
3. Within this time, press the desired key of the transmitter to be registered two or three times. The drive beeps briefly to acknowledge this.
In addition, two dots flash in the display if it is an SX5 DuoFern, indicating the active login mode in the DuoFern range. This mode remains active for 2 minutes.