The DuoFern universal dimmer can save an intermediate value. The storage can be saved via an external button, via different DuoFern transmitters or via the HomePilot®.
Store intermediate value via external pushbutton:
Press and hold the external pushbutton until the desired value is reached. When the external pushbutton is released, the value is saved. The intermediate value is approached by the external pushbutton by jogging once when switching on.
Save intermediate value via DuoFern transmitter:
With DuoFern transmitters that have a stop button, such as the standard 9491 transmitter, the stop button can be pressed during the dimming phase to save the value that is then approached.
With the Multiple Wall Controller 9494-1 and -2, the value is saved by briefly tapping the key for the opposite direction during the dimming phase.
Save intermediate value via HomePilot®:
If the intermediate value function is switched on, each switch-on command stops at the set intermediate value. Commands with percentages are excluded. E.g. scene with line 80%In addition,
you can specify whether the intermediate value is to be overwritten at any time via external pushbuttons or whether you specify the intermediate value once at this point.
