Activate the login mode by pressing the set key on the motor:
You can activate the registration mode on the RolloTube S-line by briefly pressing the set button.
To acknowledge, the tubular motor briefly moves up and down. The login mode remains active for approx. 120 seconds.
Activate registration mode via external button:
The registration mode of the RolloTube S-line can also be activated with a connected shutter switch or button as an alternative to the set button on the motor head.
To do this, tap any running direction twice and press and hold the button the third time until the tubular motor briefly starts up. Then release the button again or switch off.
Activate login mode via radio code:
In combination with a HomePilot®, the Bridge, the HomeTimer or a DuoFern central operating unit, the RolloTube S-line DuoFern can be registered with the respective device by entering the radio code. Subsequently, the remote login function can be used to
register other DuoFern devices (for example, DuoFern handheld transmitters).
Important:
After switching on the power supply, the radio code is active for max. 2 hours.
After this time has elapsed, activation using the radio code is no longer possible. Then disconnect the RolloTube S-line DuoFern from the mains for a short time to activate the time window again.
You will find the DuoFern radio code on the enclosed label. The radio code can be 6 or 10 digits.
Activate login mode via remote login function:
If the RolloTube S-line is already registered with the HomePilot®, Bridge, HomeTimer or the DuoFern control panel, you can use the remote registration function.
To do this, call up the RolloTube S-line in the HomePilot® App and select General in the configuration. Here, the remote login function can be started.
With the HomeTimer type 9498, the function is to be used under the menu item 9-9-8.
In combination with the central operating unit type 9493-1, the function can be found in the device settings.
With the older central operating unit type 9493, use menu item 1-1-2-3.