We currently have 3 different handheld transmitters in the range.
In this article we explain the functions and the differences.
|
DuoFern handheld transmitter 9491
|
DuoFern handheld transmitter 9491-2 |
DuoFern handheld transmitter Auto/Manu 9491-5 |
|
| Controllable devices | 6 x 8 devices (48) | 1 x 48 (48) | 4 x 8 (32) |
| Jog mode | YES | YES | YES |
| Direction of rotation change* | YES | YES | YES |
| End point adjustment** | YES | YES | YES |
| Auto/Manu switching *** | NO | NO | YES |
| Wall mount included | YES | YES | YES |
| Battery CR2450 | YES | YES | YES |
*The reversal of the direction of rotation or the switching between the light and device function can only be performed if only one device (actuator) is registered in the selected group, if more than one participant is registered in the selected group, the function is disabled.
**The end point setting can only be performed if only one device (actuator) is registered in the selected group, if more than one participant is registered in the selected group, the function is blocked.
◆ The end point setting is possible with DuoFern radio tubular motors.
◆ The end point setting is possible with electronic tubular motors from RADEMACHER from year of manufacture 2000, which are controlled with a correctly installed DuoFern actuator.
◆ End point setting is not possible for tubular motors connected in parallel.
*** With the DuoFern hand-held transmitter 4Kanal Auto/Manu, you can additionally switch the automatic function of the registered DuoFern end devices on or off. If the automatic function is switched off in the DuoFern end devices, only manual commands are executed. The end devices no longer respond to automatic time or shading commands, for example.