Prerequisite
- HomePilot® 2 or 3 with current firmware
- addZ USB stick is inserted in the HomePilot®.
- addZ illuminant is in delivery state
- Distance from the addZ lamp to the HomePilot® or to other consumers with Zigbee technology is not too large.
Procedure
- Start the registration mode on the HomePilot® , select Devices > Register devices in the area and start the registration mode
- switch on the voltage for the addZ illuminant. The light bulb should display several colors in succession and then flash briefly to acknowledge.
- It may take up to 60 seconds for the new addZ device to be found.
- If the device is not found, switch the power off again briefly and then on again.
- Assign a suitable name and description for the illuminant.
The addZ illuminants are displayed in the device category "Zigbee" and "All devices".