Two switching times are available per group, which can be selected as normal switching time or as astro command.
With the astro time, the dawn and dusk is calculated with the help of the postal code and this time is always automatically adjusted during the year. You can use earliest and latest times to limit the range so that your shutters do not open as early as 5:30 am in the summer.
After you have registered the devices and assigned them to a group, open the menu and select Automation (OK) > factory automation is OFF > OK > use the arrow to the side to select the desired program:
OFF - All days the same - Workdays/Weekends - Individual (each day can be set differently) confirm with OK.
Now click the arrow to the right to set the time. Here you can choose between Time and Astro.
If you select Time, the time 1 is displayed, click OK and then the arrow on the right. Here you see the factory set time of 7:00. Change the time with up and down and confirm with OK. The central operating unit now automatically addresses all the devices in the group once and switches on the automatic timer for the devices. The devices will briefly press to acknowledge the entry.
In the same way, a second time can now be set, for example, to close the shutters.
When selecting Astro, choose between Morning and Evening and then click OK. After you have pressed the arrow to the side once, the Astro function is switched on and the calculated Astro time for the day is displayed. Confirm with OK. The corresponding automatic function is switched on for all devices of the group. Use the arrow on the right to access further astro settings such as Earliest, Latest and Time offset (shifts the calculated time by x minutes).